www.rfm.com e-mail: info@rfm.com page 1 of 5 ?2009-2010 by rf monolithics, inc. SF2086C - 6/14/10 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depen dent on pcb layout and external impedance matching design. see application note no. 42 for details. 3. the design, manufacturing process, and specifications of this filter are subject to change. 4. tape and reel standard ansi / eia 481. 5. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 6. us and international patents may apply. 7. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 240.00 mhz insertion loss 113db 2 db bandwidth bw 2.0 130 mhz amplitude ripple, f c 15 mhz 1 2 db p-p amplitude ripple, f c 15 mhz, within adjacent 5 mhz windows 1 1.5 db p-p group delay deviation, f c 15 mhz 1 100 180 ns p-p group delay deviation, f c 15 mhz, within adjacent 5 mhz windows 1 75 ns p-p vswr at f c 12.5:1 40 db rejection bandwidth 1, 2 65 mhz operating temperature range -40 85 c case style sm5050-8 5 x 5 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) rfm 588 ywws sm5050-8 ?240 mhz saw filter 5.0 x 5.0 mm surface-mount case single-ended input and output complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +13 dbm maximum dc voltage on any non-ground terminal 30 vdc storage temperature range in tape and reel -40 to +85 c suitable for lead-free soldering - maximum soldering temperature 260 c for 30 s 240.00 mhz saw filter SF2086C pb caution: electrostatic sensitive device. observe precautions for handling. notes: electrical connections connection term inals port 1 input 1 port 2 output 5 ground all others dot indicates pin 1
www.rfm.com e-mail: info@rfm.com page 2 of 5 ?2009-2010 by rf monolithics, inc. SF2086C - 6/14/10
www.rfm.com e-mail: info@rfm.com page 3 of 5 ?2009-2010 by rf monolithics, inc. SF2086C - 6/14/10 SF2086C rfm rfm rfm drill all holes #76 drill (0.020) all holes are plated thru. 1.590 ref.
www.rfm.com e-mail: info@rfm.com page 4 of 5 ?2009-2010 by rf monolithics, inc. SF2086C - 6/14/10 case dimensions dimension mm inches min nom max min nom max a 4.80 5.00 5.20 0.189 0.197 0.205 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.30 1.50 1.70 0.050 0.060 0.067 d 1.98 2.08 2.18 0.078 0.082 0.086 e 1.07 1.17 1.27 0.042 0.046 0.050 f 0.50 0.64 0.70 0.020 0.025 0.028 g 2.39 2.54 2.69 0.094 0.100 0.106 h 1.27 0.050 i 0.76 0.030 j 1.55 0.061 k 2.79 0.110 l 0.76 0.030 m 2.36 0.093 n 1.55 0.061 o 2.79 0.110 p 2.79 0.110 q 2.79 0.110 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free sm5050-8 surface-mount 8-terminal ceramic case 5.0 x 5.0 mm nominal footprint top view bottom view case materials pcb footprint a 1 2 3 b 7 6 5 4 c d 7 6 5 4 e f g 1 2 3 8 8
www.rfm.com e-mail: info@rfm.com page 5 of 5 ?2009-2010 by rf monolithics, inc. SF2086C - 6/14/10 tape and reel specifications ?b? nominal size quantity per reel inches millimeters 7 178 500 13 330 3000 user direction of feed component orientation and dimensions carrier tape dimensions ao 5.3 mm bo 5.3 mm ko 2.0 mm pitch 8.0 mm w12.0 mm pin #1 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f .
|